Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Cleaning & Sweep in Arlington Heights: What to Know First
We provide independent Olympia Chimney chimney cleaning and sweep services in Arlington Heights, typically scheduling within a week during off-peak months and within two weeks before burning season. A standard Olympia Chimney sweep and Level 2 camera inspection runs $189-$289, and we deliver that price in writing before anyone touches your flue. This page is for Arlington Heights homeowners with Olympia Chimney liners, caps, or chase covers who need documented maintenance that won’t void their product warranty. Call (331) 202-2419 for a free estimate.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney ProFlex liners with premature creosote glazing. The ProFlex 316Ti alloy resists corrosion but its corrugated interior traps Stage 2 creosote in Arlington Heights homes that burn green hardwood or run the fireplace on low air for long periods. We remove glazed creosote with mechanical whips and poly brushes sized to ProFlex corrugation depth, then document liner wall thickness with the camera. If the glaze has hardened to Stage 3, we price a chemical treatment or replacement before we start.
- Olympia Chimney Gelco cap mesh that clogs with cottonwood seed. Arlington Heights neighborhoods near Lake Arlington and the Des Plaines River corridor see heavy cottonwood seed in late May and June. Gelco’s standard 5/8-inch mesh traps this debris against the cap screen, starving the fire for air and backing smoke into the room. We remove the cap, clean the mesh with compressed air, and check the spark arrestor integrity. If the mesh is fatigued from repeated cleaning, we source direct-fit Gelco replacement mesh or step up to a 3/4-inch mesh where code allows.
- Olympia Chimney chase cover corner pooling. The Gelco and Famco chase covers we see on Arlington Heights split-levels and raised ranches from the 1970s-1990s have welded corners that hold standing water after freeze-thaw cycles. Water migrates under the cover, rusts the top flue course, and drips creosote-stained water into the firebox. We lift the cover, inspect the top course with the camera, and replace with a cross-break chase cover that sheds water to the perimeter. Corrine Halstead has seen this exact pattern on Campbell Street colonials more times than she can count.
- Olympia Chimney DuraFlex relining with improper connector alignment. When a DuraFlex liner is paired with an Olympia Chimney thimble or connector in a retrofit, the offset can create a ledge where soot collects and partially blocks the flue. Our camera scan identifies the ledge in minutes; we correct it with a custom-fabricated transition piece or re-seat the liner termination. The camera doesn’t guess. Neither do we.
- Olympia Chimney HeatShield-compatible flues with degraded refractory. Some Arlington Heights homes with HeatShield cerfractory flue surfacing over an Olympia Chimney liner show spalling or delamination after 8-12 years, especially where the original liner had offset joints. We camera-map the damaged sections, quote HeatShield reapplication by section, and verify the repair with a post-job camera pass. No reapplication without pre- and post-documentation; that’s Haven Standard Clause 4.
Our Olympia Chimney Chimney Cleaning & Sweep Process
- 1
Call and schedule. A live person answers, checks availability for Arlington Heights, and notes your Olympia Chimney product line if you know it. We text your technician’s name and photo the morning of the appointment.
- 2
Arrival and setup. Your uniformed tech arrives in a marked van, lays drop cloths, and confirms the written scope and price before entering the flue. No price changes mid-job without a second written approval.
- 3
Level 2 camera inspection. We run the camera the full flue length, recording liner condition, creosote stage, joint alignment, and any Olympia Chimney-specific wear patterns. You watch live or receive the file.
- 4
Sweep and mechanical cleaning. Rotary brushes, whips, and hand tools matched to your Olympia Chimney liner diameter and material. Soot and creosote are HEPA-vacuumed, not brushed onto your hearth.
- 5
Parts decision and documentation. If we find damage, we show you the camera frame, explain OEM versus quality aftermarket options from our Haven buying network, and deliver a written repair price with warranty terms.
- 6
Final test and record. Smoke test or draft measurement, written completion certificate with photo record, and 365-Day Done Right Promise documentation. Everything goes in your file and your inbox.
Before
AfterWhat Olympia Chimney Chimney Cleaning & Sweep Costs in Arlington Heights
| Service | Price Range |
|---|---|
| Standard sweep + Level 2 inspection (Olympia Chimney liner or standard flue) | $189 - $289 |
| Stage 2-3 creosote removal (mechanical + chemical) | $340 - $520 |
| Olympia Chimney cap / chase cover removal and cleaning | $95 - $165 |
| ProFlex liner spot repair or connector reseat | $280 - $450 |
| HeatShield cerfractory reapplication (per section) | $425 - $675 |
What moves the price: flue height (two-story Arlington Heights colonials run longer than ranch lines), creosote stage, accessibility of the cap or chase cover, and whether we need to return with specialty parts. We source Olympia Chimney, DuraFlex, HeatShield, Gelco, and Famco materials through our Haven buying network to keep pricing honest. Call (331) 202-2419 for an exact quote; estimates are free.
Why Arlington Heights Homeowners Call Level Two Chimney Arlington Heights for Olympia Chimney Work
We’ve completed more than 38,000 chimney inspections and cleanings since 2009, every one with a written price before work started and a documented record when finished. The 365-Day Done Right Promise applies to Olympia Chimney jobs exactly as it does to every other: if it’s not done right, we make it right. Our techs know the difference between a ProFlex 316Ti and a standard 304 alloy liner, and they know which Arlington Heights neighborhoods see the heaviest creosote buildup from tight construction and newer airtight fireplaces. Background-checked, uniformed crews with license information on every page. Live phone support, 24/7. Free Second Opinion on any competitor’s written estimate. Materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, procured to keep your price straight.
FAQs
No, if the work is performed to NFPA 211 standards and documented. As an independent Olympia Chimney service provider, we follow manufacturer specifications for brush diameter, material compatibility, and inspection frequency. We provide written documentation of every step for your warranty file. Call (331) 202-2419 if your warranty administrator requests specific language.
The camera tells us. We measure remaining wall thickness, map corrosion patterns, and check for deformation at joints. If the 316Ti alloy shows through-wall corrosion or the corrugation has flattened at any point, we quote replacement. If it’s surface staining with intact metal, we clean and re-inspect in 12 months. You’ll see the frames before we discuss dollars.
Most Gelco caps, Famco chase covers, and ProFlex connector components arrive within 3-5 business days through our Haven buying network. Custom ProFlex liner diameters or specialty transitions may take 7-10 days. We never start a job without the part in hand; that’s Clause 1 of the Haven Standard.
NFPA 211 calls for annual inspection; cleaning frequency depends on use and fuel. Arlington Heights homeowners who burn 2-3 times weekly during heating season typically need sweeping every 12-18 months. Those with gas inserts and Olympia Chimney liners still need annual camera inspection for condensation damage and joint integrity. We date your certificate and text a reminder.
Stage 1 creosote becomes Stage 3, which is non-removable without chemical treatment or liner replacement. The risk is a chimney fire or carbon monoxide intrusion through a degraded liner. In Arlington Heights, we’ve found blocked flues from neglected Gelco caps and cracked ProFlex liners that the homeowner didn’t know existed. The inspection is cheap; the emergency call is not. Call (331) 202-2419 to schedule before burning season.
Ready to see what your flue actually looks like? Call (331) 202-2419 for a free estimate. We’ll deliver a written price, a camera inspection, and a documented record - Haven Standard, every time.
Written by Corrine Halstead, Owner, Level Two Chimney Arlington Heights at Level Two Chimney Arlington Heights, serving Arlington Heights and nearby areas.